Pages 41–46 (6 pages)

Clearances and wear limits

From the Waukesha Models 190, 185 and 180 Engine Manual

Tables for the 190-GL and 190-GLB, then the 180-GL/GLB and 185-GL/GLB: bore, stroke, displacement and oil sump capacity, piston land and skirt clearances for cast iron and aluminum pistons, ring widths, gaps and groove clearances, connecting rod, crankshaft, camshaft, idler and governor gear clearances, valve, spring and guide dimensions, cold valve lash, and tightening torques for rod nuts, main bearings, cylinder head and flywheel. The last page is blank.

Read this section free, starting at page 41

What this section covers

  • Model 190 clearances
  • Model 180 and 185 clearances
  • Piston and ring limits
  • Crankshaft and bearings
  • Valves and springs
  • Torque values
Make
Waukesha
Vehicle
Components and Systems, Engines
Type
Service Manual
Models
Models 190-GL, 190-GLB, 185-GL, 185-GLB, 180-GL, 180-GLB (incl. Model 190 oil field engines)
Pages
46

What’s inside

Engine manual

  1. Engine views and contentsFaded cover, labeled right- and left-side views of the Model 190-GL/GLB and 180-GL/GLB engines showing the magneto, oil filter, governor adjustments, carburetor jets and timing mark, and the contents page.pp. 1–4
  2. DescriptionBore, stroke and displacement for the 190, 185 and 180, then the design of the one-piece crankcase and block with wet cylinder sleeves sealed by rubber rings, heat-treated crankshafts (drilled on recent 190 oil field engines, metered-jet on others, counterbalanced on current 180s), copper-lead precision bearings, the two-weight centrifugal governor, magneto or distributor ignition, carburetion, the water pump and the vane-type oil pump.pp. 5–7
  3. Lubricationpp. 8–13
  4. Cooling systempp. 14–17
  5. Service adjustmentspp. 18–25
  6. Repair and overhaulpp. 26–33
  7. Reassemblypp. 34–40

Clearances and wear limits

  1. Clearances and wear limitspp. 41–46