Pages 174–208 (35 pages)

Hydra-Matic Drive (1946)

From the 1942 Cadillac Shop Manual with 1946 Supplement

The 1946 Hydra-Matic Drive, improved from wartime combat vehicle experience with an internal-external front pump, simpler clutches, a single reduction rear unit and a new reverse mechanism. It covers fluid checks and changes, manual and throttle linkage adjustment, band adjustment, pump pressure, fluid coupling leaks, towing, unit overhaul including servos, and diagnosis charts for shifting faults and noises.

Read this section free, starting at page 174

What this section covers

  • Adding and changing fluid
  • Manual and throttle control linkage adjustment
  • Front and rear band adjustment
  • Pump pressure and fluid coupling leaks
  • Rear servo and unit overhaul
  • Diagnosis charts, including noises
Year
1942, 1946
Models
Series 42-61, 62, 63, 60S, 67, 75 and 75 Commercial Chassis; Series 46-61, 62, 60S, 75
Pages
228

What’s inside

1942 Shop Manual

  1. Contents and Introductionpp. 1–5
  2. Lubricationpp. 6–11
  3. Body and Sheet Metalpp. 12–18
  4. FrameThe X-type frame used on all 42-series cars and the commercial chassis, with checking of frame dimensions using tram gauges and a frame dimension chart.pp. 19–20
  5. Front Wheel Suspensionpp. 21–30
  6. Rear Wheel Suspensionpp. 31–36
  7. Brakespp. 37–44
  8. Enginepp. 45–69
  9. Clutchpp. 70–73
  10. Transmissionpp. 74–79
  11. Hydra-Matic Drivepp. 80–107
  12. Fuel and Exhaust SystemGasoline tank removal, cleaning fuel lines, care of the fuel system in storage, exhaust manifold gasket installation, muffler, and gasoline tank capacities.pp. 108–109
  13. Steering Gearpp. 110–113
  14. Wheels and Tirespp. 114–119
  15. Chassis Electrical Systempp. 120–136
  16. Radiatorpp. 137–140
  17. Specifications and Special Toolspp. 141–151
  18. IndexAlphabetical subject index to the 1942 Shop Manual with page references.pp. 152–161

1946 Supplement

  1. Supplement Contents and IntroductionTitle page and contents of the 1946 Shop Manual Supplement, the Cadillac Craftsman's Code, and the introduction listing the 1946 series, wheelbases and starting engine numbers.pp. 162–166
  2. Lubrication (1946)The 1946 lubrication schedule and lubrication chart for all series.pp. 167–169
  3. Body, Frame, Suspension and Brakes (1946)1946 body and sheet metal changes (bumpers, hood lock, rust protection), the 1946 body styles list, and parking brake lever and cable changes; frame and suspension refer to the 1942 manual.pp. 170–171
  4. Engine, Clutch and Transmission (1946)1946 engine changes: Hydra-Matic flywheel, new pistons and rings, belts, valve guides, oiling system fitting and carburetor; clutch and Syncro-Mesh transmission notes.pp. 172–173
  5. Hydra-Matic Drive (1946)pp. 174–208
  6. Fuel, Steering and Wheels (1946)Muffler and tail pipe alignment, pitman and idler arm pivot adjustment, and a note that wheels and tires are unchanged from 1942.pp. 209–209
  7. Chassis Electrical and Radiator (1946)The 1946 change to a negative-grounded electrical system and which units it affects, the 1946 circuit diagram, wire code and bulb charts, and radiator changes.pp. 210–212
  8. Specifications and Special Tools (1946)pp. 213–224
  9. Supplement IndexAlphabetical subject index to the 1946 Supplement, with page references.pp. 225–228