Section 13-30 · Pages 61–73 (13 pages)

Trouble Diagnosis

From the 1967 Buick Automatic Climate Control (ACC) System Manual

Division IV. A general note and wiring harness drawings for both series are followed by a symptom, possible cause and correction table covering blower, air flow, excessive and insufficient heat, excessive and insufficient cooling, and miscellaneous faults. It ends with a procedure for checking the ambient sensor and switch assembly and the special tools page.

Read this section free, starting at page 61

What this section covers

  • Blower symptoms
  • Air flow symptoms
  • Excessive and insufficient heat
  • Excessive and insufficient cooling
  • Compressor and TDA symptoms
  • Checking the ambient sensor and switch assembly
  • Wiring harness installation
Year
1967
Make
Buick
Models
45000, 46000, 48000 and 49000 series
Pages
73

What’s inside

Contents

  1. ContentsTitle page and contents listing for the four divisions, with paragraph numbers 13-1 to 13-33 and page numbers.pp. 1–3

Specifications and adjustments

  1. 13-1Specifications and Adjustmentspp. 4–11

Description and operation

  1. 13-9Description and Operationpp. 12–47

Service procedures

  1. 13-12Service Procedurespp. 48–60

Trouble diagnosis

  1. 13-30Trouble Diagnosispp. 61–73